Vantage Controls Lighting Systems
Automated Lighting Systems simplify the lighting in your home. Reduced wall clutter and confusion at large gangs of wall switches, labelled buttons clearly describe and control your lights. From automatic security lighting to one-touch shut down of your home, lighting control not only adds convenience but saves money too.
Integrated control of HVAC (heating), burglar and fire alarms, CCTV (security camera systems), music systems, landscape irrigation systems, main water supply and hot water tank controls for vacation times makes for a simple and convenient home system. All from the convenience of your home or via any "Smart" (iPhone, iPad, Android etc.) device.
The system is virtually unlimited in it's expand-ability and capabilities to control any size home.
Basic packages for budgeting purposes for both new construction and existing home renovation projects are detailed as follows.
Integrated control of HVAC (heating), burglar and fire alarms, CCTV (security camera systems), music systems, landscape irrigation systems, main water supply and hot water tank controls for vacation times makes for a simple and convenient home system. All from the convenience of your home or via any "Smart" (iPhone, iPad, Android etc.) device.
The system is virtually unlimited in it's expand-ability and capabilities to control any size home.
Basic packages for budgeting purposes for both new construction and existing home renovation projects are detailed as follows.
New Construction, Hard Wired System
Keypad and Touch screen locations are hard wired back to the mechanical room. All high voltage lighting loads are Home Run back to the mechanical room where they are wired into the Vantage Controls electrical panel for on, off and dimming control.
1.) Twenty-Four (24)- Light Loads with Ten (10)- Control Locations
Includes:
1.) One 4- Module Master Enclosure to house up to 48 loads
2.) One Infusion Controller IC-24
3.) Two 120 volt 12-load dimming module to control 24 loads
4.) Two Equinox 40 Touch screen controllers
5.) Eight Square-touch Wire-link Keypad Stations
6.) 5-Device App License for Smart Devices
7.) Low Voltage 28” Enclosure c/w cover for Data Bus
8.) Pre-wire Keypads as required
9.) System Installation of Keypads, Data Bus Termination and Programming
Note:
High Voltage wiring and termination by the Electrical Contractor as per Quantum Systems specifications.
2.) Fourty-Four (44)- Light Loads with Sixteen (16)- Control Locations
Includes:
1.) One 4- Module Master Enclosure to house up to 48 loads
2.) One Infusion Controller IC-24
3.) Three 120 volt 12-load dimming modules to control 36 loads
4.) One 120 volt 8-load relay station with adapters
5.) Two Equinox 40 Touch screen controllers
6.) Fourteen Square-touch Wire-link Keypad Stations
7.) 5-Device App License for Smart Devices
8.) Low Voltage 28” Enclosure c/w cover for Data Bus
9.) Pre-wire Keypads as required
10.) System Installation of Keypads, Data Bus Termination and Programming
Note:
High Voltage wiring and termination by the Electrical Contractor as per Quantum Systems specifications.
Includes:
1.) One 4- Module Master Enclosure to house up to 48 loads
2.) One Infusion Controller IC-24
3.) Two 120 volt 12-load dimming module to control 24 loads
4.) Two Equinox 40 Touch screen controllers
5.) Eight Square-touch Wire-link Keypad Stations
6.) 5-Device App License for Smart Devices
7.) Low Voltage 28” Enclosure c/w cover for Data Bus
8.) Pre-wire Keypads as required
9.) System Installation of Keypads, Data Bus Termination and Programming
Note:
High Voltage wiring and termination by the Electrical Contractor as per Quantum Systems specifications.
2.) Fourty-Four (44)- Light Loads with Sixteen (16)- Control Locations
Includes:
1.) One 4- Module Master Enclosure to house up to 48 loads
2.) One Infusion Controller IC-24
3.) Three 120 volt 12-load dimming modules to control 36 loads
4.) One 120 volt 8-load relay station with adapters
5.) Two Equinox 40 Touch screen controllers
6.) Fourteen Square-touch Wire-link Keypad Stations
7.) 5-Device App License for Smart Devices
8.) Low Voltage 28” Enclosure c/w cover for Data Bus
9.) Pre-wire Keypads as required
10.) System Installation of Keypads, Data Bus Termination and Programming
Note:
High Voltage wiring and termination by the Electrical Contractor as per Quantum Systems specifications.
Existing Construction, Wireless Controls
In a renovation project where wires are already in place Vantage has designed a proprietary wireless lighting system. Any light to be added to the system is controlled by replacing the existing switch with a radio enabled dimmer. It's just that simple.
1.) Twelve (12)- Light Loads from controlled Dimmer Keypads
Includes:
1.) One Vantage Starter Kit comes with:
a.) One Surface Mount Master Enclosure
b.) One Infusion Controller IC-24
c.) One Radiolink Enabler
d.) Twelve Radiolink Easy-Touch II Keypads
2.) System Installation of Data Bus Termination and Programming
Note:
High Voltage wiring and dimmer installation by the Electrical Contractor as per Quantum Systems specifications.
2.) Twenty-Four (24)- Light Loads from controlled Dimmer Keypads
Includes:
1.) One Vantage Starter Kit comes with:
a.) One Surface Mount Master Enclosure
b.) One Infusion Controller IC-24
c.) One Radiolink Enabler
d.) Twelve Radiolink Easy-Touch II Dimming Keypads
2.) Twelve Radiolink Easy-Touch II Dimming Keypads
3.) System Installation of Data Bus Termination and Programming
Note:
High Voltage wiring and dimmer installation by the Electrical Contractor as per Quantum Systems specifications.
Includes:
1.) One Vantage Starter Kit comes with:
a.) One Surface Mount Master Enclosure
b.) One Infusion Controller IC-24
c.) One Radiolink Enabler
d.) Twelve Radiolink Easy-Touch II Keypads
2.) System Installation of Data Bus Termination and Programming
Note:
High Voltage wiring and dimmer installation by the Electrical Contractor as per Quantum Systems specifications.
2.) Twenty-Four (24)- Light Loads from controlled Dimmer Keypads
Includes:
1.) One Vantage Starter Kit comes with:
a.) One Surface Mount Master Enclosure
b.) One Infusion Controller IC-24
c.) One Radiolink Enabler
d.) Twelve Radiolink Easy-Touch II Dimming Keypads
2.) Twelve Radiolink Easy-Touch II Dimming Keypads
3.) System Installation of Data Bus Termination and Programming
Note:
High Voltage wiring and dimmer installation by the Electrical Contractor as per Quantum Systems specifications.
